Forum Discussion

Shiva's avatar
Shiva
Icon for New Contributor rankNew Contributor
7 years ago

MAX 10 FPGA Remote System Upgrade (RSU)

Hi, I am trying remote system upgrade for MAX10 FPGA device, Here i am able to write and read the rpd data of CFM1 but when i trigger the reconfiguration it is not getting reconfigured. I am doing t...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
7 years ago

Hi,

Are you writing the combined rpd file or the split rpd file? Could you provide the detail on the step you used?

Shiva's avatar
Shiva
Icon for New Contributor rankNew Contributor
7 years ago

Hi,

After clinking the generate in convert programming file the tool is generating the Combined, CFM1, CFM0, UFM rpd files, In this i am writing the CFM1 file

(already splitted rpd file) to onchip flash memory.

while generating the rpd file the SOF file in page_0 is the factory image and the SOF file in the page_1 is Application image, so after generating the rpd file i am sending the CFM1 rpd file (Application image) to onchip flash memory.

Regards,

shiva.