Forum Discussion

rshal2's avatar
rshal2
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

HPS pins

Hello, I have the following questions about assigning HPS pins: Do we need to assign HPS pins location in quartos (as I understand the pins location should already be known for each device) when ...
EBERLAZARE_I_Intel's avatar
EBERLAZARE_I_Intel
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi,

In the pin assignment the 0,1,2 represent low, medium, high. For example in slew rate, by default, the slew rate is 1 which is fast.

The high slew rate will tend to have faster 0 -> 1 or 1 -> 0.

I hope this this answers your question.