Forum Discussion

mark_lee's avatar
mark_lee
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

helpless

I use the IP "intel_generic_serial_flash_interface" in my project , when i run the project , i get an error about this :

Error(12790): Can't use active serial memory interface block -- configuration scheme is not Active Serial
Error(16297): An error has occurred while trying to initialize the plan stage.
Error: Quartus Prime Fitter was unsuccessful. 2 errors, 1 warning
Error: Peak virtual memory: 7414 megabytes
Error: Processing ended: Tue Nov 17 18:56:13 2020
Error: Elapsed time: 00:00:52
Error(293001): Quartus Prime Full Compilation was unsuccessful. 3 errors, 53 warnings

1 Reply

  • YuanLi_S_Intel's avatar
    YuanLi_S_Intel
    Icon for Regular Contributor rankRegular Contributor
    5 years ago

    Hi Mark,


    From the error message, seems like the configuration scheme you selected is not Active Serial. Also, can you please check if you are programming with JIC bitstream?


    Thank You