Forum Discussion
MAlha
New Contributor
New ContributorGreetings, I'm trying to implement the design below.
I'm using an Altera Cyclone II DE2 version from my university. I'm don't seem to be able to find the components illustrated in Fig. 11 and how I should read Fig. 10. Any explanations or references ...
Vicky1
Regular Contributor
Regular ContributorHi,
"The research paper posted above gave me no additional knowledge outside the design I already attached and presented in my original question."
Have you gone through it seriously?
Check the TRISTATE INVERTER : FIGURE 6: A tristate inverter. And TSRAM PUF : FIGURE 7: An 1-bit TSRAM PUF. and relative explanation.
Go through it again until you clearly understand.
Then refer the below link & try by yourself with quartus tool,
ftp://ftp.altera.com/up/pub/Tutorials/DE2/Digital_Logic/tut_quartus_intro_schem.pdf
Let me know if this has helped resolve the issue you are facing or if you need any further assistance.
Best Regards
Vikas Jathar
(This message was posted on behalf of Intel Corporation)
