Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

DE2: USB Device to on board SRAM Data Transfer

i am trying to design an architecture of usb controller to enable read data from external flash drive (through usb device port of de2 board) and store it in onboard sram memory chip of altera de2 board and vice versa. i want to do it purely in hardware using vhdl or verilog that means i don't want to use the nios ii or sopc builder. i need some information on this. thanks.

2 Replies

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    I am also trying to do the same but with the help of sopc. Can you please guide me. Note that I am new to FPGA.

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    12 years ago

    --- Quote Start ---

    i am trying to design an architecture of usb controller to enable read data from external flash drive (through usb device port of de2 board) and store it in onboard sram memory chip of altera de2 board and vice versa. i want to do it purely in hardware using vhdl or verilog that means i don't want to use the nios ii or sopc builder. i need some information on this. thanks.

    --- Quote End ---

    Hi, i'm just trying the same you just posted time ago. Did you achieve it? Could you say me how or help me with it? thanks