Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

ADC Interfacing with DE2 (General Overview)

Hi We have decided to use the Nios DE2 board as a development tool for my part 4 Electrical Engineering Project. I have some experience with using the Nios DE2 Board however I have very li...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Thanks for your help guys!

--- Quote Start ---

The DE2 Board provides users two 40-pin expansion headers. Each header

provides DC +5V (VCC5), DC +3.3V (VCC33), two GND pins for users to build

their own daughter cards using the DE2 expansion ports.

--- Quote End ---

So does that mean 3.3 V or 5V or can you choose? Obviously if it is possible to have 5V that would be preferred as that is the output levels of my AtMega8.