Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Warning: No Clocks Defined in Design

Everytime I compile my design in the Quartus II software (the web edition), I get a warning that states "No clocks defined in design" even though in my .bdf file I have an altpll block with the input...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

The output of the pll is connected to the clocks in the shift registers. I just need one clock in my design to run at 200kHz, and looking at my .bdf it looks like I have that, but the same "no clock" error is popping up.

Thanks!