VCCIO compatiblity issue with "new" MAX10 project

hi,

i spend a little time on your problem, checked an example from altera and i see that your configuration scheme does not correspond to their :

1- go "device" -> device and option pins

2- in "configuration" select "Single Uncompressed image with memory Initialization(512.....)

3- go "general and uncheck all.

this should work now.

I'm sorry, i'm not familiar with max10 fpga, it's flash architecture has specials features to configure it, i don't know (not an expert). (maybe JTAG or internal configurtation stuff)

I suggest you to read "https://www.altera.com/en_US/pdfs/literature/hb/max-10/ug_m10_config.pdf", even if i already know you won't ^^

bye.