Forum Discussion

Jamil's avatar
Jamil
Icon for New Contributor rankNew Contributor
4 years ago

Using eda_simulation XCELIUM in QUARTUS PRIME PRO 20.4

Hi FPGA community, We need to simulate our FPGA design post synthesis (VO file). In QUARTUS 18.1 we used the following TCL commands: set_global_assignment -name EDA_SIMULATION_TOOL "Xcelium-V...
Nurina's avatar
Nurina
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi Jamil,

We did not receive any response to the previous reply provided, thus I will put this case to close pending. Please post a response in the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you with your follow-up questions.

Regards,
Nurina

PS: If you find any comment from the community or Intel Support to be helpful, feel free to give Kudos.

Jamil's avatar
Jamil
Icon for New Contributor rankNew Contributor
4 years ago

Hi all,

This problem has been solved.

There is a new TCL command to be add in the QUARTUS release 20.4 .

set_global_assignment -name FLOW_ENABLE_EDA_NETLIST_WRITER ON

This was new, now it works.

Many thanks.

Jamil