Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Trouble with EPCS pin assignments in Quartus II 11.0

I am using an EPCS16 to configure a Cyclone III EP3C25Q240 and configuration works fine. However, I also want to use the EPCS16 for Remote Update, which requires that I connect the EPCS signals to...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

That did the trick, my design now compiles and I can program the EPCS through JTAG. I haven't tried it with Remote Update yet, but hopefully that will work too.

Thanks FvM for the quick reply. Saved me countless hours. :)