Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Trouble with EPCS pin assignments in Quartus II 11.0

I am using an EPCS16 to configure a Cyclone III EP3C25Q240 and configuration works fine. However, I also want to use the EPCS16 for Remote Update, which requires that I connect the EPCS signals to...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

I remember previous "nonsense" errors related to EPCS pins. I guess, in this case assigning 0 MHz toggle rate to the DCLK pin in pin planner or assignment editor will help.