Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
7 years ago

Trouble using EPCS on Intel (Altera) DE10-standard

I'm using the DE-10 standard Intel FPGA. I'm trying to get a simple program that blinks a single LED to run when the FPGA is booted. From my understanding of the manual, the process involves converti...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
7 years ago

Yes to all those questions. I am using the correct .sof file. I validated that the stand alone .sof file works on its own first. The .jic file does reach 100% when I click start in the programmer. I do restart the board. When I restart the board, all the LED's are lit to their semi-dim state (pulled up).