Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

Trouble using component..SOS

hello folks, I'm implementing a project on cyclone II board.For that, I've made my design files into an IP in the sopc builder. After the system gets generated, I'm seeing the avalon signals in th...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

Refer to chapter 4 (SOPC Builder components) and 5 (Component Editor) of Quartus II v7.1 handbook volume 4 (SOPC Builder). If you are using different version of Quartus II, then look for the chapters with above heading to get the idea of pin mapping for avalon slave and generating/building custom components using component editor.