Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

Terasic Blaster issue with Quartus II

I purchased a P0302 USB-Blaster™ download cable, to program an Altera® FPGA mounted on a printed circuit board, at the recommendation of my electronics design vendor. He has used these devices succes...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

The blaster II runs at a higher jtag clock frequency than the older ones. Check the signal integrity of the jtag clock. You may need to work on it. I think there is a setting somewhere to lower the frequency. You might also try that.