Switch from Quartus® Prime Pro Edition 17.1.1
(Intel Acceleration Stack for Intel Xeon CPU with FPGAs Version 1.2)
to
Quartus Prime Pro Edition 19.4 (Intel FPGA SDK for OpenCL™)

Question

Hi,we want to switch from Quartus® Prime Pro Edition 17.1.1 (Intel Acceleration Stack for Intel Xeon CPU with FPGAs Version 1.2) toQuartus Prime Pro Edition 19.4 (Intel FPGA SDK for OpenCL™)but aocl install creates no acl0-Device.Thanks Simon

meiyan_l_intel · Answer

Hi,

According to https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/acceleration-card-arria-10-gx/getting-started.html, the Acceleration Stack v1.2 is only supported to Quartus Prime Pro v17.1.1 due to some hardware configuration reason. I would recommend customer to use OpenCL SDK v17.1 to minimize the error during compilation.

Thanks

Forum Discussion

Switch from Quartus® Prime Pro Edition 17.1.1 (Intel Acceleration Stack for Intel Xeon CPU with FPGAs Version 1.2) to Quartus Prime Pro Edition 19.4 (Intel FPGA SDK for OpenCL™)

1 Reply

Recent Discussions

USB-Blaster II malfunction

Questa FPGA Starter Edition – License file missing FEATURE/INCREMENT lines

Generating Free License "not working"

License 6AF7_0186 for University Program

Serial Lite IV - Rx Simulation Issues