Forum Discussion

SCAND2's avatar
SCAND2
Icon for New Contributor rankNew Contributor
7 years ago

Support for device 1SG280LU3F50E3VGS1 not installed in Quartus 18.0 Pro Edition

Hi, I am working with a Stratix 10 GX FPGA Development Kit. I am trying to compile my design and I am facing the problem "Support for device 1SG280LU3F50E3VGS1 not installed" as soon as I launch my...
CalvinJoaz_P_Intel's avatar
CalvinJoaz_P_Intel
Icon for Contributor rankContributor
7 years ago

Hi SCAND2,

It is expected the 1SG280-S1 (1SG280LU3F50E3VGS1) is no longer supported (has been remove) starting from Quartus Pro v18.0.

This information is stated under Table 2(Page 6) from the "Intel® Quartus® Prime Pro Edition Software and Device Support Release Notes Version 18.0" :

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/rn/archives/rn-qts-pro-dev-support-18.0.pdf

You can compared the 1SG280-S1 information under Table 2(Page 5) from "Intel® Quartus® Prime Pro Edition Software and Device Support Release Notes Version 17.1":

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/rn/archives/rn-qts-pro-dev-support-17.1.pdf

You can able to check each Quartus software version release notes to find out which devices are being support.

Thank you.