Forum Discussion

MKlee2's avatar
MKlee2
Icon for New Contributor rankNew Contributor
4 years ago

Stratix 10 using PCI-Express connection 3.0 dies after 30 min

Hello, for one of our projects we need to work with an expnsion card using a stratix 10 and a pci-e 3.0 connection. I build a test system, based on terasics and intels examples (driver/api/applic...
KhaiChein_Y_Intel's avatar
KhaiChein_Y_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi,


Could you share the PCIe settings and the .ip file?

Do you have the signal tap on the link status and LTSSM?


Thanks

Best regards,

KhaiY


MKlee2's avatar
MKlee2
Icon for New Contributor rankNew Contributor
4 years ago

Hi,

I was also in contact with terasic and as it turns out, after the some time the board overheats.

So it's most likely connected to the overheating, that my design dies.

For now, until this issue is resolved (overheating) I guess we should close this thread/put it on hold.

Sorry for the late answer/topic in general. It took me some time to realize that the system might overheat.

Greetings