Forum Discussion

echen73's avatar
echen73
Icon for New Contributor rankNew Contributor
7 years ago

SignalTap staus: Not compatible

Issue: In SingalTap, sometime(not always) when I add/remove signals to/from setup window, save-> full-compile-> program device-> Run analysis, the status shows "Not compatible". How to solve this i...
echen73's avatar
echen73
Icon for New Contributor rankNew Contributor
7 years ago
  1. I program the device through the SignalTap GUI.
  2. When it happens next time I'll try to select again the recompiled .SOF before running the signaltap.