Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Signal Tap logic analyser issue

I am using Cyclone IV E (EP4CE6F17C7N) on my custom built board. I programmed the device with a simple .sof file using Quartus II 11.0 Web Edition via USB Blaster using Programmer tool. my boa...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

My best suggestion is to make sure that the SignalTap file is associated with the Quartus project. The actual SignalTap file may not be identified in the Assignments --> Settings --> SignalTap File Section. -James