Forum Discussion

AAnch's avatar
AAnch
Icon for New Contributor rankNew Contributor
7 years ago

Shortening NIOSII Simulation run time with FPGA SOC system as recommended in AN351

Hi, As described below i have simulated with NIOSII, RAM & JTAG UART qsys system. Compiled and simulated the example Hello World C code program. From the simulation i see that it takes around 2 ms to...
Ahmed_H_Intel1's avatar
Ahmed_H_Intel1
Icon for Frequent Contributor rankFrequent Contributor
7 years ago

The best way is to make all the system wait for 2ms or get an enable signal to control the other devices in order to get the NIOS II ready first and then start the execution with enabling everything at the same time.