Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Ripple clock going off chip using Timequest

I am trying to divide down a clock by 1024, yes I know that old chesnut (150KHz) and have no PLLs left. I was just using a counter and picking out bit[9] to act as my clock. This clock was the...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

1. As long as it passes timing analysis, then you're ok.

2. In such cases, bite the bullet and use a ripple clock. Again, as long as the design passes timing analysis, you're ok.