Reusing schematics

Question

Hi,
I am a newbee and so I started to try out small parts of my target design.
Now I want to start a new project and I want to reuse this parts to compose the next level.
I didn't find any starting point.
I also want to have some test bench. Uptil now I started a simulation and key in the FPGA input clock periode, but I think there should be something to tell the system to remember that settings.
Lot of the links behind the 'Help'  buttons pointing to non existing web pages. So it is not easy to learn using Quartus.
I use the newest version of Quartus Prime Lite.

With best regards

Gerhard

kennyt_altera · Answer

Hi Gerhard,I would suggest you go through here https://community.intel.com/t5/FPGA-Wiki/University-Workshops/ta-p/735639Or https://software.intel.com/content/www/us/en/develop/topics/fpga-academic/learn/workshops.htmlIt provide a workshop and step by step user guide for new Quartus user. Let me know after you attended the workshop, you still have question for it.

gerhard56 · Answer

Thanks.
My problem with Quartus Prime Lite is, that most of the links behind the help buttons were dead (V 20.1.1), so its hard to find good infos.

Will try to go through this material asap.

With best regards

Gerhard

kennyt_altera · Answer

Thanks, let us know if you have more question.

kennyt_altera · Answer

We do not receive any response from you to the previous reply that we have provided. Please post a response in the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you with your follow-up questions.

Forum Discussion

Reusing schematics

4 Replies

Recent Discussions

recovery timing issue

error in JTAG server (error code 35) and autodetect (unable to scan device chain) Quartus 18.1

Quartus/Signaltap complains about wrong version

License issue

No access to the Self Service Licensing Center (SSLC)