Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Read-only on Pin Planner

Hi, I am using Qsys and QuartusII (14.0) to find out which pins to use for a DDR3 on an ArriaV GZ. I am basically a hardware designer, and I have reserved all of Bank 7 for the DDR3 interface. There ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

OK I didn't realise you have to remove the top few lines of comments. I did that and the assignments were imported without giving errors. However when I recompile the project the new .pin file is exactly the same as the old one (ie uses bank 3 and 4 instead of bank 7) so it completely ignored my .csv file.