Forum Discussion

IoanFlorucza's avatar
IoanFlorucza
Icon for New Contributor rankNew Contributor
4 years ago
Solved

Quartus Programmer SW, 2 SW versions on the same PC

We have an test system PC installed into the out MFG floor, which use Altera Blaster download cable (PL-USB-BLASTER-RCN) to program the FPGA of the products. On this test system PC is installed and u...
  • YuanLi_S_Intel's avatar
    YuanLi_S_Intel
    4 years ago

    Hi


    Please find my response below:

    1. can be add somehow in the old Quartus SW (13.0.1) to be able to

    program the Cyclone 10 FPGA? if yes how?

    No


    2. If I purchase the Alter Blaster 2 (PL-USB2-BLASTER) download cable

    and used only with the latest Quartus SW (20.1.1) still i will have the

    same issue?

    I think this a good idea. The reason is blaster 2 and blaster 1 have different driver and they are not the same.


    Regards,

    Bruce


YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi


Please find my response below:

1. can be add somehow in the old Quartus SW (13.0.1) to be able to

program the Cyclone 10 FPGA? if yes how?

No


2. If I purchase the Alter Blaster 2 (PL-USB2-BLASTER) download cable

and used only with the latest Quartus SW (20.1.1) still i will have the

same issue?

I think this a good idea. The reason is blaster 2 and blaster 1 have different driver and they are not the same.


Regards,

Bruce