Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Quartus programmer stop at 80%

Hi: I build the sof file without problem. somehow, when I program it to the board, the progress bar stops at 80%. It is cyclone iii 3c25f324 fpga. Is it related to any specific issue? Thanks
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

no, I tried programming with the sof file built under 9.1 months ago and it is good. I updated to 10.0sp1. I noticed the LE 100% occupied. could it be a problem?

Total combinational functions 21,403 / 24,624 ( 87 % )

Dedicated logic registers 15,775 / 24,624 ( 64 % )

Family Cyclone III

Device EP3C25F324I7

Timing Models Final

Total logic elements 24,565 / 24,624 ( 100 % )

Total registers 15933

Total pins 128 / 216 ( 59 % )

Total virtual pins 0

Total memory bits 151,221 / 608,256 ( 25 % )

Embedded Multiplier 9-bit elements 53 / 132 ( 40 % )

Total PLLs 1 / 4 ( 25 % )

--- Quote Start ---

Any error msgs?

--- Quote End ---