Forum Discussion

DShat4's avatar
DShat4
Icon for New Contributor rankNew Contributor
7 years ago

Quartus Prime not detecting DE0-Nano-SoC (Cyclone V FPGA)

Hello to everyone, I recently acquired a DE0-Nano-SoC development board for a university project and was able to connect it to my PC (Ubuntu 16.04) using the micro USB cable provided. However, to ...
DShat4's avatar
DShat4
Icon for New Contributor rankNew Contributor
7 years ago

I did connected it to the USB-blaster port. Apparently the problem was that I had to create a file called "92-usbblaster.rules" on the /etc/udev/rules.d directory and write the following piece of code:

# USB-Blaster
SUBSYSTEM=="usb", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6002", MODE="0666"
 
SUBSYSTEM=="usb", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6003", MODE="0666"
 
# USB-Blaster II
SUBSYSTEM=="usb", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6010", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6810", MODE="0666"

I hope this helps someone else!