Forum Discussion

DShat4's avatar
DShat4
Icon for New Contributor rankNew Contributor
7 years ago

Quartus Prime not detecting DE0-Nano-SoC (Cyclone V FPGA)

Hello to everyone, I recently acquired a DE0-Nano-SoC development board for a university project and was able to connect it to my PC (Ubuntu 16.04) using the micro USB cable provided. However, to ...
Abe's avatar
Abe
Icon for Frequent Contributor rankFrequent Contributor
7 years ago

The DE0-Nano board has 2 Micro-USb ports. one for the USB-blaster and the other for the USB UART. Make sure you are connecting to the correct USB port , power on the board and then try. Take a look at the following pic