Forum Discussion

New Contributor

5 years ago

Solved

Quartus Prime Lite 20.1 cannot recognize DE1-SoC board via USB cable

I run Quartus Prime 20.1 Lite from Ubuntu 20.04 LTS and tried to program DE1-SoC board, but Quartus cannot recognize the board. "Hardware Setup..." shows "No Hardware" while the board is hooked via U...

UOG
5 years ago
Need some settings as described in this link:

https://rocketboards.org/foswiki/Documentation/UsingUSBBlasterUnderLinux

After such configure, the board is recognized.

AR_A_Intel

Super Contributor

5 years ago

Hello

Welcome to INTEL forum. Thanks for your update. For further information regarding the DE1 SOC fpga Board. It would be better if you could contact Terasic for enquiry related to Terasic board. https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=12&No=20

Please accept my apologies for not being able to assist you fully as this is out of my expertise.

Forum Discussion

Quartus Prime Lite 20.1 cannot recognize DE1-SoC board via USB cable

Recent Discussions

Quartus 20.1std compilation fails for Quartus map - Device 10AS057K2F40I1SG

Is Quartus Prime Pro 22.4 Compatible with Stratix 10 NX Series Device?

Timing analysis - long combinational path

QuartusPro 25.3 Crashed after using the Signal Tap Logic Analyzer

Duplicate_hierarchy_depth / duplicate_register