Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Quartus II v.11.0

Help, please.

When I try to compile some project using QUARTUS II v.11.0 or v.10.01 (web edition bouth) i get these messages:

Info: You have a valid up-to-date license

Info: You have a valid up-to-date license

Error: Selected feature of TimeQuest Timing Analyzer is not available with your current license, or license does not exist

Info: You have a valid up-to-date license

Error: Current module quartus_asm ended unexpectedly

Error: Quartus II Full Compilation was unsuccessful. 2 errors, 0 warnings

I use Wwindows xp sp3, with hardware which meets QUARTUS requirements (512 Mb of Ram)

There was no errors during installation process, I have tied to download License file and use it, to reinstall program, to install fresh coppy of windows and than QUARTUS... nothing helps.

I know that there is more threads on this subject, but there is no solution, so I ask again. I

Apologize for my English.

20 Replies

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    i've seen this on the forum before, but i'm not sure if it was resolved. have you taken a look?

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    I read these (two or three) posts and did not help me. Any other idea ?

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    can you start a new project for scratch and target a recent device (CIII or CIV)? just run a small design like a counter and see if it runs all the way through compilation

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    I have tried that and still getting same messages:

    Info: You have a valid up-to-date license

    Info: You have a valid up-to-date license

    Error: Selected feature of TimeQuest Timing Analyzer is not available with your current license, or license does not exist

    Info: You have a valid up-to-date license

    Error: Current module quartus_asm ended unexpectedly

    Error: Quartus II Full Compilation was unsuccessful. 2 errors, 0 warnings
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    that's really strange

    you said you're using Web Edition and a license file. can you try the counter test project without any license assigned to Quartus?
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    Hi,

    have you tried to delete all subdirectories (e.g. "db", "incremental_db",..) and start a recompilation (deleting the subdir forces a complete recompile...)

    Give it a try..

    Carlhermann
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    -I have made new project and tried to compile it, and I have got errors, so it is a complete recompilation.

    -I am trying to enable "Talk back" function, but I dont know what is FAE (field application engineer) username, or where to get it.

    -Btw, now I use version 9.1 and it works without errors, but I would like to find solution for problems with newer versions...
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    Well - can you post the Archieved projekt as it's easier to play around and post the answer than doing wild guesses...

    Sincerely, Carlhermann
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    Where can I find software release notes for quartus ii version 11.0? Now I can find quartus ii version 10.1 sp1 software release notes only. Even in page quartus ii subscription edition.