Honored ContributorHello Dear,
Today we are using Quartus II Programmer with mode JTAG (LPT from the computer to pcb board and then to flat cable 5*2 to burning file) See pic below : ALTERA BLASTER LPT JTAG MC - epm3064atc44-10 I want to know if you have the same thing with USB and burning 4 PCB board in parallel at the same time. Thanks and have a nice day Oren
Honored ContributorDo a search in eBay.com for "Altera Byteblaster". I think the jtag interface allows you to program up to ten devices in the chain ... but don't quote me on it. It's been years since I used the byteblaster programmer. I bought mine from terasic.com long ago.
Honored Contributorhello Rode,
thanks for your response, i want to know is it possible to connect 4 pcb with MC EPM3064ATC44-10 in the same time and burning file with http://www.buyaltera.com/scripts/partsearch.dll?detail&name=544-1775-nd. with the Altera Byteblaster is take 3 sec for one pcb. thanks Oren
