Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Programming DE1-SoC FPGA only from Quartus Prime Lite Edition Ubuntu 16.04

Hello, I am trying to simply program my CycloneV FPGA on the DE1-SoC board from Quartus Prime Lite in Ubuntu 16.04. I cannot seem to get it to work. The user guide says to do an auto-detect from the ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

I have the answer. I will provide my files

/etc/udev/rules.d/51-usbblaster.rules

SUBSYSTEM=="usb",

ENV{DEVTYPE}=="usb_device",

ATTR{idVendor}=="09fb",

ATTR{idProduct}=="6810",

MODE="0666",

NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}",

RUN+="/bin/chmod 0666 %c"

# USB-Blaster

# BUS=="usb", SYSFS{idVendor}=="09fb", SYSFS{idProduct}=="6001", MODE="0666"

# BUS=="usb", SYSFS{idVendor}=="09fb", SYSFS{idProduct}=="6002", MODE="0666"

# BUS=="usb", SYSFS{idVendor}=="09fb", SYSFS{idProduct}=="6003", MODE="0666"

# USB-Blaster II

# BUS=="usb", SYSFS{idVendor}=="09fb", SYSFS{idProduct}=="6010", MODE="0666"

# BUS=="usb", SYSFS{idVendor}=="09fb", SYSFS{idProduct}=="6810", MODE="0666"

/etc/udev/rules.d/altera-usb-blaster.rules

ATTR{idVendor}=="09fb", ATTR{idProduct}=="6001", MODE="666"

I also copied pgm_parts.txt into the bin directory, which also has jtagd. I then ran jtagd. After that everything worked