Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Problems with programming a CFI Flash

Hello, I have a problem to program a CFI Flash. Following is the Information output from the Nios II Flash Programmer: Executing command: $SOPC_KIT_NIOS2/bin/bin2flash --input="D:/FileSyst...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Hi,

I am also facing the same issue... I am not able to flash using the nios2-flash-programmer.exe, please find the below error message

[NiosII EDS]$ nios2-flash-programmer.exe --base=0x0 cfi_flash_0.flash --cable=usb-blaster

using cable "usb-blaster [usb-0]", device 1, instance 0x00

resetting and pausing target processor: ok

checksummed/read 12kb in 0.3s

erased 128kb in 0.6s (213.3kb/s)

program failed

leaving target processor paused

I am using a single threaded, sequential OS less environment in my project. I am unable to get the program flashed... please advice..

your help is greatly appreciated.

Thanks,

Kiran Kumar