Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Problem with: Start compilation

Hi to everyone,

I have a problem when i do Start Compilation and i don't know how to do to solve this problem.

I'm posting the log and i hope someone can help me because i have to do a project for a univesity homework.

Internal Error: Sub-system: SUTIL, File: /quartus/synth/sutil/sutil_device.cpp, Line: 1242

is_legal_device()

Stack Trace:

0x9702: MEM_SEGMENT_INTERNAL::locked_allocate + 0x62 (ccl_mem)

0xa268: mem_realloc_wrapper + 0x188 (ccl_mem)

0x5580: mem_out_of_memory + 0x4f0 (ccl_mem)

0x82c5: MEM_SEGMENT_INTERNAL::allocate + 0x95 (ccl_mem)

End-trace

Quartus II Version 9.1 Build 304 01/25/2010 SJ Web Edition

Service Pack Installed: 1

Can someone help me ?

5 Replies

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    16 years ago

    I have olso tryied with the service pack 2 but the error is the same:

    Internal Error: Sub-system: SUTIL, File: /quartus/synth/sutil/sutil_device.cpp, Line: 1242

    is_legal_device()

    Stack Trace:

    0x9702: MEM_SEGMENT_INTERNAL::locked_allocate + 0x62 (ccl_mem)

    0x9d58: MEM_SEGMENT_INTERNAL::locked_allocate + 0x6b8 (ccl_mem)

    End-trace

    Quartus II Version 9.1 Build 350 03/24/2010 SJ Web Edition

    Service Pack Installed: 2
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    16 years ago

    which device are you targeting? there's a clue about a problem in is_legal_device().

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    16 years ago

    The Family Device which i selected is Stratix II and the Target Device: Auto device selected by the Fitter. It's all right until i do the the Functional simulation, but when i set to Timing and i do Start Compilation then appear a window error. The window error is still the same:

    Internal Error: Sub-system: SUTIL, File: /quartus/synth/sutil/sutil_device.cpp, Line: 1242

    is_legal_device()

    Stack Trace:

    0x9702: MEM_SEGMENT_INTERNAL::locked_allocate + 0x62 (ccl_mem)

    0x9d58: MEM_SEGMENT_INTERNAL::locked_allocate + 0x6b8 (ccl_mem)

    End-trace

    Quartus II Version 9.1 Build 350 03/24/2010 SJ Web Edition

    Service Pack Installed: 2
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    16 years ago

    i was not able to reproduce this on 9.1sp2 for Linux (subscription edition, web edition does not have the Quartus Simulator).

    in web edition you may have to select one of the two supported SII parts to do a full compile:

    Stratix II / II GX FPGAs: EP2S15, EP2SGX30

    from the Quartus II web edition and subscription edition comparison:

    http://www.altera.com/literature/po/ss_quartussevswe.pdf
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    16 years ago

    --- Quote Start ---

    i was not able to reproduce this on 9.1sp2 for Linux (subscription edition, web edition does not have the Quartus Simulator).

    in web edition you may have to select one of the two supported SII parts to do a full compile:

    Stratix II / II GX FPGAs: EP2S15, EP2SGX30

    --- Quote End ---

    Thank you so much thepancake, thanks to your suggest i found the problem. The problem was that i had done a custom istallation and i selected only the basic tools and so no one of Stratix II devices driver were installed. So i have done a complete istallation and now i can do olso a Timing simulation.

    I apologise 4 my english. Thank you again Good Bye