Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Problem rebuilding source with new Quartus II

Hello, I recently inherited a project board which has a Stratix II EP2S30F672 FPGA which is booted from an EPC4QC100. Project originally compiled under quartus vers 7. Now when the project is co...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

You should install Quartus 7.x and see if you can generate a working design. There is 7.0, 7.1 and 7.2, plus the various service packs. Check the original design's .qsf file and it should say what the last version of quartus used was.

Might also want to post your qsf file here.