Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

problem JTAG programming an EPCQ256

I have a new terasic DE1-Soc rev D. Cyclone V SOC model 5CSEMA5F31C6N. I am unable to get JTAG programming to program the epcq256 on the board using quartus 14. I am able to download and run ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Are you using Quartus 14.0? Perhaps the EPCQ256 is only supported in the latest edition. If you are using 14.0, then file a Service Request directly with Altera.

Cheers,

Dave