Preservation level: Final leads to Quartus crash on re-run

Hello,

I still got this crash:

I will try from a clean run to see if that makes any difference with that quartus.ini.

I'm also attaching the route report (the last one generated before the crash),

as you can see the long high speed interconnects are above 100% utilization,

I'm wondering if that is not the cause of the crash.

(Please add the .rpt allowed file in this website such that I don't have to add the .txt extension).

note: Overall fit report usage:

Fitter Status : Successful - Tue Jul 4 14:13:44 2023
Quartus Prime Version : 22.4.0 Build 94 12/07/2022 SC Pro Edition
Revision Name : stratix10_wrapper
Top-level Entity Name : stratix10_wrapper
Family : Stratix 10
Device : 1SX280HU2F50E1VG
Timing Models : Final
Power Models : Final
Device Status : Final
Logic utilization (in ALMs) : 514,940 / 933,120 ( 55 % )
Total dedicated logic registers : 277863
Total pins : 227 / 1,152 ( 20 % )
Total block memory bits : 58,828,507 / 240,046,080 ( 25 % )
Total RAM Blocks : 3,583 / 11,721 ( 31 % )
Total DSP Blocks : 418 / 5,760 ( 7 % )
Total DIB Channels : 0 / 75 ( 0 % )
Total HSSI RX channels : 0 / 96 ( 0 % )
Total HSSI TX channels : 0 / 96 ( 0 % )
Total HSSI HPS : 0 / 1 ( 0 % )
Total HSSI EHIPs : 0 / 4 ( 0 % )
Total PLLs : 7 / 184 ( 4 % )