Forum Discussion
New Contributorpost simulation does not support cyclone V?
Hi @jihunmoon
Gate-level timing simulation is supported only for the Arria II GX/GZ, Cyclone IV, MAX II, MAX V, and Stratix IV device families.
Unfortunately, the gate-level timing simulation is not supported for Cyclone V device.
We recommend that you use Timing Analyzer rather than gate-level timing simulation with any simulator.
Reference:
You may checkout the User Guide below on how-to use the Timing Analyzer:
https://www.intel.com/content/www/us/en/programmable/documentation/ony1529966370740.html
The tool is useful in analysis you design and to meet timing.
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.
Super ContributorHi @jihunmoon
Gate-level timing simulation is supported only for the Arria II GX/GZ, Cyclone IV, MAX II, MAX V, and Stratix IV device families.
Unfortunately, the gate-level timing simulation is not supported for Cyclone V device.
We recommend that you use Timing Analyzer rather than gate-level timing simulation with any simulator.
Reference:
You may checkout the User Guide below on how-to use the Timing Analyzer:
https://www.intel.com/content/www/us/en/programmable/documentation/ony1529966370740.html
The tool is useful in analysis you design and to meet timing.
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.
jihunmoonThank you so much Richard.
- RichardT_altera
You're welcome.
I’m glad that your question has been addressed. With that, I will now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.
