Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Pin seen as a clock in TimeQuest but is not a Clock

I have been getting an error Node: GND was determined to be a clock but was found without an associated clock assignment. The pin has nothing to do with a clock, and I do not see how TimeQuest...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Connect master clock to all registers. connect I31_out0 to the enable port of those registers which you have clocked by I31_out0. That way the enable is synchronised to master clock. The only concern then is that enable may be very much delayed. Try it first and let us see.