Forum Discussion

sagarsonavaneBH's avatar
sagarsonavaneBH
Icon for New Contributor rankNew Contributor
4 years ago

On chip ADC hangs up in 10M50DAF256I76

We are using the part 10M50DAF256I76 in one of our designs. In this design we are using the available on chip modular dual ADC. The interface for the ADC is generated inside QSYS with the following ...
sstrell's avatar
sstrell
Icon for Super Contributor rankSuper Contributor
4 years ago

If you use a mode other than continuous (mode set to 0x0), you don't use the run bit. I'm not 100% certain on this, but that's the impression I get from the chart.