Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Modelsim is exiting with code 211.

Hi, every time I try to run a simulation with Modelsim I get: Modelsim is exiting with code 211. Then Modelsim closes. Transcript says: # vsim -gui work.test_counter # Start t...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Hi,

Same problem appeared here this week (Modelsim 10.4b), even with one of the VHDL tutorial example design provided in Quartus 15.1.

Tested on three different Win7 machines, on different designs...

Also tried to disable Symantec, no success