Forum Discussion

Ivor's avatar
Ivor
Icon for New Contributor rankNew Contributor
4 years ago

MAX10 .sof and .pof programming problem - device remains tristate

First time using MAX10. I have three LEDs connected, VHDL driving one low, one high and toggle third one. I do compile, .sof is generated. Run programmer and autodetect. Device is selected c...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi,


We have several design example for NIOS II on MAX 10. You may take a look at link below:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/tt/tt_my_first_nios_sw.pdf

https://www.intel.com/content/dam/altera-www/global/en_US/uploads/4/4f/Hello_world_LCD_tutorial.pdf


You may find more design example at link below:

https://fpgacloud.intel.com/devstore/


If you have further question on NIOS, i would suggest you to create another thread in NIOS II category so that our NIOS expert in the community is able to assist.


Regards,

Bruce