Forum Discussion

twister1398's avatar
twister1398
Icon for New Contributor rankNew Contributor
4 years ago
Solved

Max10 ADC simulation in QuestaSim fails to simulate output

I'm trying to simulate the Max10 ADC in QuestaSim 2021.3. The ADC Core ready signal (modular_adc_0_command_ready) never goes high. I suspect that the following warning may be related to this behaviou...
RichardT_altera's avatar
RichardT_altera
Icon for Super Contributor rankSuper Contributor
4 years ago

Hi @twister1398

This is normal behavior, if you compile the fiftyfivenm_atoms_ncrypt.v standalone, you can see there are modules listed in the compiled library.

Regarding to ready signal (modular_adc_0_command_ready) never goes high, I would suggest to review your design and testbench.

You may checkout the User Guide below for further information:

https://www.intel.com/content/www/us/en/programmable/documentation/sam1393576011848.html#sam1456148842880

Best Regards,
Richard Tan

p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.

  • RichardT_altera's avatar
    RichardT_altera
    Icon for Super Contributor rankSuper Contributor
    4 years ago

    Hi @twister1398

    Thank you for the best answer confirmation. I’m glad that your question has been addressed. With that, I will now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.

    Best Regards,
    Richard Tan

    p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.