New ContributorI am getting this error when I try to simulate my design using Questasim:
** Error: C:/quartuspro/quartus/eda/sim_lib/mentor/cyclone10gx_atoms_ncrypt.v(36): in protected region
# Optimization failed
# Error loading design
Anyone know what is causing this?
Super ContributorHi @Nitin1
Have you compile the simulation libraries before you simulate your design?
You may checkout the User Guide below on how-to simulate Intel FPGA Designs using third party simulator tools.
https://www.intel.com/content/www/us/en/programmable/documentation/gft1513990268888.html
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.
New ContributorYes I did compile the simulation libraries
New ContributorI am using the simulation script generated by NIOS II Eclipse
Super ContributorHi @Nitin1
Have you try to simulate in our Modelsim Intel FPGA Edition?
See if the issue persists.
Share me the simulation log file and the simulation script so I can investigate further.
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.
New ContributorHi Richard,
I tried Model sim Intel Starter FPGA edition but get different errors. I have attached simulation files.
New ContributorHi Richard,
Is it possible to get a temporary license for Intel Modelsim Intel FPGA Edition (not Starter edition) to see if the problem goes away?
Super ContributorHi @Nitin1
Sorry, we do not provide temporary license here. You may need to contact your distributor FAE if you have one dedicated to your account/company.
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.
Super ContributorHi @Nitin1 ,
I don't really get much from the .zip file.
What types of error that you get when simulate using the Modelsim Intel Starter FPGA edition?
Does it pass the previous error that occurred in Questasim?
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.
Super ContributorHi @Nitin1
May I know what types of error that you get when simulate using the Modelsim Intel Starter FPGA edition?
Does it pass the previous error that occurred in Questasim?
Could you help to share the design files, testbench, script as well so I can look into this further?
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.
Super ContributorHi @Nitin1
Since we do not receive any response from you to the previous question/reply/answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.
