Is there a way to have an automatic process to flash this part like running a SCRIP or calling the application form a third party SW like VB.NET or C.NET to have an automatic process.

Question

I have a board were there is an ARRIA 10 microprocessor and it has an external memory MT25QU256 and were are avable to flash this external memory using the QUARTUS application with the USB-BLASTER , the question is, Is there a way to have an automatic process to flash this part like running a SCRIP or calling the application form a third party SW like VB.NET or C.NET to have an automatic process.

Thanks for the help

johnt_altera · Answer

Hi,From the information provided, you are interested in performing remote system upgrade. You can refer to design example in https://fpgacloud.intel.com/devstore/platform/18.0.0/Pro/cyclone-10-gx-remote-system-update/ which utilize UART to performed remote update. Then you can add script to automatically send the data to the flash.Let me know if my understanding is incorrect.

Forum Discussion

Is there a way to have an automatic process to flash this part like running a SCRIP or calling the application form a third party SW like VB.NET or C.NET to have an automatic process.

1 Reply

Recent Discussions

AGI027 Dev Kit example build takes a long time

Quartus Prime only loads in admin mode

License issue

Perpetual license Quartus II doesn't allow to build Cyclone V devices anymore.

Warning at Standard 25.1 by Arria 10