Forum Discussion

tibweb's avatar
tibweb
Icon for New Contributor rankNew Contributor
7 years ago

Is it possible to program a Cyclone 10 LP FPGA evaluation kit using a RPI?

I was looking for a way to ease our life, when setting up our development system that contains a Raspberry PI3 and Cyclone 10 LP development board. The final step in the process is to program the FPG...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
7 years ago

Hi Tibweb,

You may use Jrunner software created by Intel PSG to program FPGA using an embedded. You will need to create a FPGA design and generate .rbf programming file in order to use this.

https://www.intel.com/content/www/us/en/programmable/support/support-resources/download/legacy/jrunner.html

You may also refer to the application note at link below for more information about jrunner software.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an414.pdf

Regards,

YL