Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Installation of USB-Blaster Driver DE2 board programming with Quartus II 12.0 or13.0

Earlier I installed the driver in a DE1 board and it worked fine. I used Quartus II 5.0 provided in Cd-s along-with the board. Now license for it is not available. I was suggested to download it from...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Finally a success!!!!!! I could install through the device manager. I am still keeping my finger crossed to download an sof for programming the FPGA.

Your points: The new device disappeared from the control panel. But it was there in the device manager.

Without the installation or without any connection it shows the FPGA cyclone II device but not the usb-blaster in the opened window when tools/programmer is clicked in Quartus II.

Regarding the checksum - if it only depends on the file how can I get a different checksum? I do not understand this.

Thanks a lot for your detailed analysis.