Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
7 years ago

Input signal pin as global clock

I have a Wavesshare EP4CE10 development board and want to input a 10MHz clock to go in as a global clock. Unfortunately, the dev board seems to have only one clock input physically accessibl...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
7 years ago

Thanks very much, that did the trick

The (non obvious) solution was adding the three entries as shown below, I was only entering the first!

Assignment Name = Global Signal

Value = Global Clock

Enabled =Yes