Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

I have some error to use OpenCL.. please help me.

Hellow guys, I have some problem to use opencl. I am using AOCL and quartus 13.1 version. My probelm is when i command " aocl diagnostic" the error are occcur. the message is belowe that. aocl ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Check my previous reply. Unless you program the FPGA via JTAG using an OpenCL image, and then reboot your machine so that the board is detected via PCI-E, you will never be able to use this board with OpenCL. Changing your hardware will not help.