Forum Discussion

GGale2's avatar
GGale2
Icon for New Contributor rankNew Contributor
6 years ago

I have configured a GXB transceiver to RX Simplex. But I get an error message in Quartus 18.1 pro related to duplex channel cluster constraints

I have configured a GXB transceiver to be RX Simplex. I get the next error message in Quartus 18.1 Pro Error(14566): The Fitter cannot place 4 periphery component(s) due to conflicts with existing c...
CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi Guido,

Sorry for the delay. I have been out for the past week. It seems like I am still unable to see the ZIP attached. However, as I understand it, Armin has also helped to file an IPS case on behalf of you on this and we have shared the resolution through the IPS case. To facilitate subsequent discussion and tracking purpose, it would be great that we use the IPS for further follow up.

Please let me know if there is any concern. Thank you.

Best regards,

Chee Pin

GGale2's avatar
GGale2
Icon for New Contributor rankNew Contributor
6 years ago
Hi Chee Pin Tanks for the support. I will discuss with Armin for the follow up. Regards Guido