Forum Discussion

OldMarty's avatar
OldMarty
Icon for New Contributor rankNew Contributor
4 years ago

How do i connect 2 different named buses please?

Hi All, I have a problem trying to connect 2 different buses between megafunction devices within the schematic editor. Here's my current problem, a megafunction lpm_counter has for example 4 ou...
Nurina's avatar
Nurina
Icon for Regular Contributor rankRegular Contributor
4 years ago

Here's a guideline on naming a bus for your information: https://www.intel.com/content/www/us/en/programmable/quartushelp/13.0/mergedProjects/design/ged/ged_gid_name_bus.htm

Since you've solved your problem I'll put this case to a close pending. I now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.

Regards,
Nurina

PS: If you find any comment from the community or Intel Support to be helpful, feel free to give Kudos.

OldMarty's avatar
OldMarty
Icon for New Contributor rankNew Contributor
4 years ago

Hi Nurina,

Where does that bus guide come from? I can't see anything as informative as that in the user guide pages.

Thanks for the bus info, it helps a lot.